Engineering Kits for College Students

Engineering Kits for College Students

Engineering Kits for College Students is an article about various Engineering kits you will be using in your Engineering.

Engineering Kits for College Students

This article is about Engineering Kits for College Students that can help them in their projects and technical stuff. Before learning about the various kits, let us take a look at the Engineering skills. Engineering is a field that mainly focuses on Skills. Engineering can be done by everyone, as long as you have a passion to find out problems and solving them, which is basically known as problem-solving. In this field, students are equipped with creative Engineering problem-solving techniques and some of the fundamentals for balanced skills.

Do you believe  in yourself and tell yourself, “there will always be a better way !” Certainly, engineering is for you!

Basic Engineering Kits for College Students

There are various branches of Engineering in which you need some kits to perform and practice skills.

One of the common kits needed for engineering students is a basic Engineering drawing kit. It consists of measuring equipment like Rulers(0-30cm or 15cm),  safety point compass and dividers, protractor(360 deg or 180 deg), sharpener, eraser, graphite pencil or mechanical pencil(4H, 2H, 2B, 4B, etc which are used as indicators, B to H spectrum pencils), lettering guide, mini drafter.

Engineering Kits for College Students Engineering Kits for College Students

These kits are helpful in the Engineering Drawing. Here you can learn the design of materials, projecting your information via charts and drawings.

 Essential Kits for Mechanical Students

Engineering Kits for College Students

Here are some of the basic kits that help you with your projects.

  • A pendulum. This will teach about controls, DC motors, programming, and some dynamics. Plus you’ll have to build the whole system, which will give you experience with fabricating.
  • A robotic arm. This will extend your knowledge from all the things in the pendulum project.
  • Build something (e.g., active cooler) with a Peltier device. This will give you some experience with thermodynamics and material choice if you optimize.
  • Sensors and data collection from the above projects with which you could also easily get some experience. For example, measure the temperature of whatever you are heating/cooling. Use a piece of aluminum and a strain gage to look at stress, strain, and thermal expansion. You can do this with a freezer as well.
  • Besides these Mechanical Engineers use the ALGORITHM tool in many forms. An algorithm is an effective method with an intention behind its form, which is expressed within a finite amount of space and time and in a well-defined formal language for producing a useful operational function. Starting from an initial state and initial mental “input”, the mental instructions describe a computation or an action that, when executed with an algorithmic device, proceeds through a finite a number of well-defined successive states, eventually producing an “output” and terminating at a final ending state.
  • The transition from one form to the next is not necessarily deterministic as some algorithm tool, known as randomized algorithms, incorporate random input including inspirations.
  • This algorithm operator can be contained in diverse shapes and intentions ranging from a ruler and a pencil and a rubber to the capacity of a modern computer.

Essential Kits for an Electrical Engineer

Here are some of the basic requirements for an Electrical Engineer

Engineering Kits for College Students

  • The foremost basic component you need to grab hold of is a breadboard and a multimeter. Both are must have to begin with. A breadboard is where you actually connect your circuit elements to it. And a multimeter is a measuring instrument which is used to measure the physical parameters under test, such as nodal voltage, current drawn, etc. It is your best buddy during circuit debugging too.

Engineering Kits for College Students


 Some of the basic requirements:

  • Carbon resistors diodes
  • breadboard
  • multimeter
  • pnp, npn transistors
  • LEDs
  • jumper cables
  • 9 and 12v battery
  • on-off switch
  • heat sink
  • solder rod and wires.
  • LDR.

There are some of the useful kits that can be useful for your projects.

Engineering Kits for College Students

It is basically an Arduino Starter Kit for Engineers and enthusiasts who want to make something cool using the Arduino.

Engineering Kits for College Students

Basically, there is no complete Arduino kit available because there are too many components in existence. You could get a basic breadboard, caps, resistors.

List of components you need:

  • Resistors
  • Decent capacitors which are Hydrolytic
  • Ceramic capacitors
  • Breadboards
  • Jumper wires
  • Voltage regulators of different voltages such as 9v,12v etc
  • Logic gates
  • Potentiometers
  • LEDs
  • Trimpots., etc

Essential kits for a Civil Engineer

Engineering Kits for College Students

Civil Engineer should basically learn the Auto-CAD, Staad pro, Revit/ETABS are optional.

As a Civil Engineer, you should know how to study the drawings. You need the basic drawing instruments.

The basic kits needed for a Structural Engineer are –

Engineering Kits for College Students

It is the basic Bridges and Skyscrapers kit which helps you in the development of structures.

Essential kits for a Computer Engineer

Engineering Kits for College Students

Computer Engineers use a variety of software tools and hardware tools for the development of systems.

The best starter kit for a Computer Engineer is a Pi. All you need to get a Pi running is a USB keyboard, mouse and a screen.

Computer engineers require specialized software, tools, and apps to research and develop ideas for the development of new products and their associated systems. You need to be able to create various blueprints and schematics for structures, systems, and machines,  and work collaboratively with other engineers, drafters, and team members, and you need to be able to work productively and efficiently. Basically, that is why computer engineers need software, tools, and apps to streamline design and development processes rather than hinder them.

The tools used by a Computer Engineer are

  • Auto-Desk Product Design Suite which is best known for its 3D design.
  • MATLAB which is used in performing  mathematical functions to solve science and engineering problems.
  • CATIA which provides an instinctive 3D experience with world-class 3D modeling and simulation capabilities that optimize the effectiveness of each user.
  • ZW3D which makes full use of existing drawings with powerful data exchange when product planning.
  • PTC Creo enables manufacturers to achieve product and service advantage in the age of the Internet of Things.

These are some of the Engineering Kits for College Students. If you are interested in learning more skills and the essential requirements for Engineering, then visit Eckovation.

Don't miss out!
Subscribe To Our Newsletter

Learn new things. Get an article everyday.

Invalid email address
Give it a try. You can unsubscribe at any time.